Dell Dimension 4700 Owner's Manual - Page 87
Connect the power cable to the system board see
View all Dell Dimension 4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
NOTICE: Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1"). 6 Connect the power cable to the system board (see page 56). 7 Locate the data cable from the CD or DVD drive in the upper drive bay and connect its middle data connector to the new drive. power cable first CD/DVD connector (primary drive) second CD/DVD connector (secondary drive) 8 Reattach the front panel (see page 72). 9 Replace the computer cover (see page 89). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 10 Connect your computer and devices to electrical outlets, and then turn them on. 11 See the documentation that came with the drive for instructions on installing any software required for drive operation. Removing and Installing Parts 87