Dell Latitude 5550 Owners Manual - Page 131
Installing the fingerprint reader (optional
View all Dell Latitude 5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
About this task The following images indicate the location of the fingerprint reader and provide a visual representation of the removal procedure. Figure 94. Removing the fingerprint reader Steps 1. Lift the latch and disconnect the fingerprint-reader cable from the connector on the USH board. 2. Move the fingerprint-reader cable away from the fingerprint reader so that the cable is not covering the fingerprint reader. 3. Remove the screw (M2x3) that secures the fingerprint-reader bracket to the palm-rest assembly. 4. Slide and remove the fingerprint-reader bracket from the palm-rest assembly. 5. Lift the fingerprint reader, along with its cable, off the palm-rest assembly. Installing the fingerprint reader (optional) CAUTION: The information in this installation section is intended for authorized service technicians only. Prerequisites If you are replacing a component, remove the existing component before performing the installation process. Removing and installing Field Replaceable Units (FRUs) 131