Dell Latitude 5550 Owners Manual - Page 134
Dummy SIM-card slot filler, Removing the dummy SIM-card slot filler
View all Dell Latitude 5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
About this task The following images indicate the location of the smart card reader and provide a visual representation of the installation procedure. Figure 97. Installing the smart-card reader Steps 1. Align and place the smart-card reader on its slot on the palm-rest assembly. 2. Replace the two screws (M2x2) that adheres the smart-card reader to the palm-rest assembly. 3. Connect the smart-card cable to the connector on the USH board and close the latch. Next steps 1. Install the assembly-inner frame. 2. Install the battery. 3. Install the base cover. 4. Install the SIM card. 5. Follow the procedure in After working inside your computer. Dummy SIM-card slot filler Removing the dummy SIM-card slot filler CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SIM card. 3. Remove the base cover. 4. Remove the 4G WWAN card or 5G WWAN card, as applicable. 5. Remove the wireless card. 6. Remove the memory modules. 134 Removing and installing Field Replaceable Units (FRUs)