Dell Latitude 5550 Owners Manual - Page 75

Removing the battery resets the BIOS setup settings to default. It is recommended that you note

Get Dell Latitude 5550 PDF manuals and user guides View all Dell Latitude 5550 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SIM card. 3. Remove the base cover. About this task CAUTION: Removing the battery resets the BIOS setup settings to default. It is recommended that you note the BIOS setup settings before removing the battery. The following images indicate the location of the battery and provide a visual representation of the removal procedure. Figure 35. Removing the battery Steps 1. Disconnect the battery cable from the battery cable connector (BATT1) on the system board (if not disconnected earlier). 2. Loosen the five captive screws (M2x4) that secure the battery to the palm-rest assembly. 3. Lift the battery off the palm-rest assembly. 4. Flip the battery and peel the tape that adheres the battery cable to the battery. 5. Remove the battery cable from the routing guides on the battery. 6. Disconnect the battery cable from the connector on the battery. Removing and installing Field Replaceable Units (FRUs) 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
SIM card
.
3.
Remove the
base cover
.
About this task
CAUTION:
Removing the battery resets the BIOS setup settings to default. It is recommended that you note the
BIOS setup settings before removing the battery.
The following images indicate the location of the battery and provide a visual representation of the removal procedure.
Figure 35. Removing the battery
Steps
1.
Disconnect the battery cable from the battery cable connector (BATT1) on the system board (if not disconnected earlier).
2.
Loosen the five captive screws (M2x4) that secure the battery to the palm-rest assembly.
3.
Lift the battery off the palm-rest assembly.
4.
Flip the battery and peel the tape that adheres the battery cable to the battery.
5.
Remove the battery cable from the routing guides on the battery.
6.
Disconnect the battery cable from the connector on the battery.
Removing and installing Field Replaceable Units (FRUs)
75