Dell Latitude 5550 Owners Manual - Page 137
Prerequisites, About this task, Steps, Removing the palm-rest assembly
View all Dell Latitude 5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the SIM card. 3. Remove the base cover. 4. Remove the 4G WWAN card or 5G WWAN card, as applicable. 5. Remove the wireless card. 6. Remove the memory modules. 7. Remove the M.2 2230 or M.2 2280 SSD from slot 1, as applicable. 8. Remove the M.2 2230 SSD from slot 2, if applicable. 9. Remove the battery. 10. Remove the assembly-inner frame. 11. Remove the system board. NOTE: The system board can be removed with the heat sink attached in order to simplify the procedure and preserve the thermal bond between the system board and heat sink. 12. Remove the display assembly. 13. Remove the smart-card reader. 14. Remove the fingerprint reader, if applicable. About this task NOTE: When replacing the palm-rest assembly, transfer the dummy SIM filler to the new palm-rest assembly. The following image indicates the location of the palm-rest assembly and provides a visual representation of the removal procedure. Figure 100. Removing the palm-rest assembly Steps Remove all the components mentioned in the pre-requisites to get the palm-rest assembly. Removing and installing Field Replaceable Units (FRUs) 137