Dell Latitude 5550 Owners Manual - Page 83
Speakers, Removing the speakers
View all Dell Latitude 5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Figure 42. Installing the touchpad Steps 1. Place the touchpad into its slot on the palm-rest assembly. 2. Align the screw holes on the touchpad to the screw holes on the palm-rest assembly. 3. Replace the five screws (M2x2.5) that secure the touchpad to the palm-rest assembly. 4. Lift up the flap below the touchpad cable and replace the screw (M2x2.5) that secures the touchpad to the palm-rest assembly. 5. Connect the touchpad cable to the connector on the touchpad and close the latch to secure the cable. 6. Connect the keyboard-backlight cable to the connector on the touchpad and close the latch to secure the cable. 7. Connect the keyboard cable to the connector on the system board and close the latch to secure the cable. 8. Adhere the keyboard cable to the touchpad. Next steps 1. Install the assembly inner frame. 2. Install the wireless card. 3. Install the 4G WWAN card or 5G WWAN card, as applicable. 4. Install the battery. 5. Install the base cover. 6. Install the SIM card. 7. Follow the procedure in After working inside your computer. Speakers Removing the speakers CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. Removing and installing Field Replaceable Units (FRUs) 83