Dell Latitude 5550 Owners Manual - Page 85
Installing the speakers, Rubber grommets
View all Dell Latitude 5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Figure 44. Installing the speakers Steps 1. Using the alignment posts, place the left and right speakers into their slots on the palm-rest assembly. 2. Route the speaker cable through the routing guides on the palm-rest assembly. 3. Connect the speaker cable to the speaker cable connector (SPK1) on the system board. NOTE: Ensure that the rubber grommets are seated into the slot and installed on the speakers properly. Figure 45. Rubber grommets Next steps 1. Install the assembly-inner frame. 2. Install the base cover. 3. Install the SIM card. 4. Follow the procedure in After working inside your computer. Removing and installing Field Replaceable Units (FRUs) 85
Figure 44. Installing the speakers
Steps
1.
Using the alignment posts, place the left and right speakers into their slots on the palm-rest assembly.
2.
Route the speaker cable through the routing guides on the palm-rest assembly.
3.
Connect the speaker cable to the speaker cable connector (SPK1) on the system board.
NOTE:
Ensure that the rubber grommets are seated into the slot and installed on the speakers properly.
Figure 45. Rubber grommets
Next steps
1.
Install the
assembly-inner frame
.
2.
Install the
base cover
.
3.
Install the
SIM card
.
4.
Follow the procedure in
After working inside your computer
.
Removing and installing Field Replaceable Units (FRUs)
85