Dell MXG610s Fibre Channel Switch Module Installation Guide May 2018 - Page 25
from the power source
View all Dell MXG610s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
NOTE: Do not interrupt the firmware download process. If you encounter a problem, wait for the 30 minutes time-out before issuing the firmware download command again. Disrupting the process; for example, by disconnecting the switch from the power source, can render the switch inoperable and may require you to seek help from your switch service provider. 8 Start a separate CLI session on the switch module while the upgrade is proceeding. To monitor the upgrade progress, use the firmwareDownloadStatus command. 9 Enter the version command after the switch module reboots to verify the firmware upgrade. Switch module monitoring 25
NOTE:
Do not interrupt the
firmware
download process. If you encounter a problem, wait for the 30 minutes time-out
before issuing the
firmware
download command again. Disrupting the process; for example, by disconnecting the switch
from the power source, can render the switch inoperable and may require you to seek help from your switch service
provider.
8
Start a separate CLI session on the switch module while the upgrade is proceeding.
To monitor the upgrade progress, use the
firmwareDownloadStatus
command.
9
Enter the
version
command after the switch module reboots to verify the
firmware
upgrade.
Switch module monitoring
25