Dell MXG610s Fibre Channel Switch Module Installation Guide May 2018 - Page 5
About this guide, Support hardware and software - emc brocade
View all Dell MXG610s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 About this guide This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting, inserting modules, and connecting to a power source. CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment. WARNING: Only trained and qualified personnel can install this equipment. Read this guide before you install and power up this equipment. This equipment contains two power cords. Disconnect both power cords before servicing. WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation. Figure 1. Class 1 laser product tag WARNING: When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical transceiver ports. Avoid exposure to laser radiation and do not stare into open apertures. Topics: • Support hardware and software • Document conventions • Document feedback Support hardware and software This document is applicable for the following Fibre Channel (FC) switch modules: Table 1. FC switch modules Blade Server FC switch module Mini-Mezz HBAs Dell EMC MXG610s FC switch Emulex LPm31002-D Emulex LPm32002-D QLogic QME2692-DEL QLogic QME2742-DEL Supported Dell EMC chassis Dell EMC PowerEdge MX7000 Required OS version Brocade fabric OS 8.1.0_Inx The following table lists the models of this switch module supported and available for use with the Dell EMC PowerEdge MX7000 chassis: About this guide 5