Dell MXG610s Fibre Channel Switch Module Installation Guide May 2018 - Page 28
Networking settings, Management, Apply, Monitoring, Enable SNMP, Advanced Settings
View all Dell MXG610s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Figure 12. Networking settings 5 Click and expand the Management option. Specify a hostname and root password. Click Apply. Figure 13. Management settings 6 Click and expand the Monitoring option. Select the Enable SNMP check box, the SNMP version, and enter a read community string. Click Apply. Figure 14. Monitoring settings 7 Click and expand the Advanced Settings option. Select the needed check boxes. 28 Initial setup and verification
Figure 12. Networking settings
5
Click and expand the
Management
option. Specify a hostname and root password. Click
Apply
.
Figure 13. Management settings
6
Click and expand the
Monitoring
option. Select the
Enable SNMP
check box, the SNMP version, and enter a read community string.
Click
Apply
.
Figure 14. Monitoring settings
7
Click and expand the
Advanced Settings
option. Select the needed check boxes.
28
Initial setup and
veriļ¬cation