Dell MXG610s Fibre Channel Switch Module Installation Guide May 2018 - Page 34

8 Technical specifications This section highlights the features and specifications for the Dell EMC MXG610s 32 Gbps FC switch module. System specifications Table 6. System specifications System components Enclosure Power inlet Power supplies Fans Cooling System architecture System processors Table 7. Fibre Channel specifications System components Fibre Channel ports ANSI Fibre Channel protocol Modes of operation Fabric initialization FCIP-IP over Fibre Channel Port status Description Less than 1U module-2.75 cm / 1.08 inches Internal to the chassis 12 V power supply from the Dell EMC PowerEdge MX7000 chassis 3.3 V standby power supply derived from 12 V source on the switch module Maximum power-150 Watts Internal to the chassis Integrated system cooling; back-to-front port-side exhaust Nonblocking shared memory switch Freescale PowerPC T1022E with two cores at 1.2 GHz Description Default switch mode • 16 external ports supporting 8 Gbps, 16 Gbps, and 32 Gbps speeds using eight SFPs and two QSFPs • 16 internal ports supporting 16 Gbps and 32 Gbps speeds Fibre Channel Physical and Signaling Interface standard-FC-PH Fibre Channel Class 2, Class 3, and Class F Complies with FC-SW-5 Complies with FC-IP 2.3 of FCA profile Bicolor LED-amber/green 34 Technical specifications