Dell PowerConnect 8100 CLI Reference Guide - Page 1058

from different sources have the same preference, PowerConnect routing prefers a static route over a dynamic route. Static Reject Routes To administratively control the traffic destined to a particular network so that it is not forwarded through the router, PowerConnect enables configuring a static reject route for that network on the router. Such traffic is discarded and the ICMP destination unreachable message is sent back to the source. Static reject routes are typically used to prevent routing loops. Default Routes PowerConnect routing provides a preference option for the configuration of default routes. A configured default route is treated exactly like a static route. Therefore, default routes and static routes have the same default preference. Commands in this Chapter This chapter explains the following commands: encapsulation ip address ip mtu ip netdirbcast ip route ip route default ip route distance ip routing show ip brief - show ip interface show ip protocols show ip route show ip route configured show ip route connected show ip route preferences show ip route summary show ip traffic show ip vlan show routing heap summary 1058 IP Routing Commands