Dell PowerConnect 8100 CLI Reference Guide - Page 1366

Command Mode Interface Configuration (VLAN) mode. User Guidelines This command has no user guidelines. Example The following example allows no RIP control packets to be sent by VLAN 11. console(config-if-vlan11)#ip rip send version none redistribute The redistribute command configures RIP protocol to redistribute routes from the specified source protocol/routers. If the source protocol is OSPF, there are five possible match options. Syntax redistribute ospf [metric integer] [match [internal] [external 1] [external 2] [nssa-external 1] [nssa-external 2]] no redistribute ospf redistribute {static | connected} [metric integer] • metric integer - Specifies the metric to use when redistributing the route. Range: 0-15. • match internal - Adds internal matches to any match types presently being redistributed. • match external 1 - Adds routes imported into OSPF as Type-1 external routes into any match types presently being redistributed. • match external 2 - Adds routes imported into OSPF as Type-2 external routes into any match types presently being redistributed. • match nssa-external 1 - Adds routes imported into OSPF as NSSA Type- 1 external routes into any match types presently being redistributed. • match nssa-external 2 - Adds routes imported into OSPF as NSSA Type- 2 external routes into any match types presently being redistributed. • static - Redistributes static routes. 1366 Routing Information Protocol Commands