Dell PowerConnect 8100 CLI Reference Guide - Page 1526

Example The following example configures an access-list called mlist as the management access-list. console(config)# management access-class mlist management access-list Use the management access-list command in Global Configuration mode to define an access list for management, and enter the access-list for configuration. Once in the access-list configuration mode, the denied or permitted access conditions are configured with the deny and permit commands. To remove an access list, use the no form of this command. Syntax management access-list name no management access-list name • name - The access list name. (Range: 1-32 printable characters) Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines This command enters the access-list configuration mode, where the denied or permitted access conditions with the deny and permit commands must be defined. If no match criteria are defined the default is deny. If reentering to an access-list context, the new rules are entered at the end of the access-list. Use the management access-class command to select the active access-list. The active management list cannot be updated or removed. 1526 Management ACL Commands