Dell PowerConnect 8100 CLI Reference Guide - Page 1460

multicast address ff02::101 (reserved for SNTP) for server packets on port number 123. The client logic to handle packet contents doesn't change with support for IPv6 networks. Commands in this Chapter This chapter explains the following commands: show sntp configuration show sntp server show sntp status sntp authenticate sntp authentication-key sntp broadcast client enable sntp client poll timer sntp server sntp trusted-key sntp unicast client enable clock timezone hours-offset no clock timezone clock summer-time recurring clock summer-time date no clock summer-time show clock show sntp configuration Use the show sntp configuration command in Privileged EXEC mode to show the configuration of the Simple Network Time Protocol (SNTP). Syntax show sntp configuration Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode, Config mode and all Config sub-modes User Guidelines This command has no user guidelines. 1460 Clock Commands