Dell PowerConnect 8100 CLI Reference Guide - Page 79

Table 1-1. System Command Groups (continued) Command Group Description Radius Configures and displays RADIUS information. Spanning Tree Configures and reports on Spanning Tree protocol. TACACS+ Configures and displays TACACS+ information. VLAN Configures VLANs and displays VLAN information. 802.1x Configures and displays commands related to 802.1x security protocol. Data Center Technology Commands Data Center Bridging Commands Data Center Bridging Exchange Protocol (DCBX) is used by DCB devices to exchange configuration information with directly connected peers. The protocol is also used to detect misconfiguration of the peer DCB devices and, optionally, for configuration of peer DCB devices. FIP Snooping Commands FCoE Initialization Protocol (FIP) is used to perform the functions of FC_BB_E device discovery, initialization and maintenance. FIP snooping is a frame inspection method used by FIP Snooping Bridges to monitor FIP frames and apply policies based upon the L2 header information in those frames, following recommendations in Annex C of FC_BB_5 Rev 2.00 Priority Flow Control Commands Provides priority-based flow control that can pause (inhibit transmission of) individual priorities within a single physical link. Layer 3 Commands ARP (IPv4) Manages Address Resolution Protocol functions. DHCP Server and Relay Manages DHCP/BOOTP operations on the system. Agent (IPv4) DHCPv6 Configures IPv6 DHCP functions. DVMRP (Mcast) Configures DVMRP operations. IGMP (Mcast) Configures IGMP operations. IGMP Proxy (Mcast) Manages IGMP Proxy on the system. IP Helper/DHCP Relay Configures relay of UDP packets. Command Groups 79