Dell PowerConnect 8100 CLI Reference Guide - Page 252

console(config)#line telnet console(config-telnet)# authorization commands mycmdAuthList enable authentication Use the enable authentication command in Line Configuration mode to specify the authentication method list when accessing a higher privilege level from a remote telnet or console. To return to the default specified by the enable authentication command, use the no form of this command. Syntax enable authentication {default | list-name} no enable authentication • default - Uses the default list created with the aaa authentication enable command. • list-name - Uses the indicated list created with the aaa authentication enable command. (Range: 1-12 characters) Default Configuration Uses the default set with the command aaa authentication enable. Command Mode Line Configuration mode User Guidelines Use of the no form of the command does not disable authentication. Instead, it sets the authentication list to the default list (same as enable authentication default). Example The following example specifies the default authentication method when accessing a higher privilege level console. console(config)# line console console(config-line)# enable authentication default 252 AAA Commands