Dell PowerConnect 8100 CLI Reference Guide - Page 1212

Syntax area area-id virtual-link router-id [authentication [message-digest | null]] [hello-interval seconds] [retransmit-interval seconds] [transmit-delay seconds] [dead-interval seconds] [[authentication-key key] | [messagedigest-key key-id md5 key]] no area area-id virtual-link router-id [authentication [message-digest | null]] [hello-interval] [retransmit-interval] [transmit-delay] [dead-interval] [[authentication-key] | [message-digest-key]] Parameter Description Parameter area-id router-id authentication message-digest null hello-interval seconds dead-interval seconds retransmit-interval seconds transmit-delay seconds md5 key key-id Description Identifies the OSPF stub area to configure. (Range: IP address or decimal from 0-4294967295) Valid IP address. Specifies authentication type. Specifies that message-digest authentication is used. No authentication is used. Overrides password or messagedigest authentication if configured for the area. Number of seconds to wait before sending hello packets to the OSPF virtual interface. (Range: 1-65535) Number of seconds to wait before the OSPF virtual interface on the virtual interface is assumed to be dead. (Range: 1-65535) The number of seconds to wait between retransmitting LSAs if no acknowledgement is received. (Range: 0-3600) Number of seconds to increment the age of the LSA before sending, based on the estimated time it takes to transmit from the interface. (Range: 0-3600) Use MD5 Encryption for an OSPF Virtual Link. Authentication key for the specified interface. (Range: 8 bytes or less if the authentication type is simple and 16 bytes or less if the type is encrypt.) Authentication key identifier for the authentication type encrypt. (Range: 0-255) 1212 OSPF Commands