Dell PowerConnect 8100 CLI Reference Guide - Page 1327

NSF Restart Interval The number of seconds a helpful neighbor allows a restarting router to complete its graceful restart. NSF Restart Status Whether the router is currently performing a graceful restart. NSF Restart Age The number of seconds until a graceful restart expires. Only non-zero when the router is in graceful restart. NSF Restart Exit Reason The reason the previous graceful restart ended. Possible values are Not attempted, In progress, Completed, Timed out, Topology change, and Manual clear. NSF Helper Support Whether this router is configured to act as a graceful restart helpful neighbor. Possible values are: Helper Support Always, Disabled, or Planned. NSF Helper Strict As a graceful restart helpful neighbor, whether to terminate the LSA Checking helper relationship if a topology change occurs during a neighbor's graceful restart. Redistributing This field is a heading and appears only if you configure the system to take routes learned from a non-OSPF source and advertise them to its peers. Source Shows source protocol/routes that are being redistributed. Possible values are static, connected, or RIP. Tag Shows the decimal value attached to each external route. Subnets When this option is not configured, OSPF will only redistribute classful prefixes. Distribute-List Shows the access list used to filter redistributed routes. Example The following example enables OSPF traps. console#show ipv6 ospf Router ID 0.0.0.2 OSPF Admin Mode Enable ASBR Mode Disable ABR Status Disable Exit Overflow Interval 0 External LSA Count 0 External LSA Checksum 0 OSPFv3 Commands 1327