Dell PowerConnect 8100 CLI Reference Guide - Page 1525

Command Mode Management Access-list Configuration mode User Guidelines Rules with gigabitethernet, tengigabitethernet, fortygigabitethernet, vlan, and port-channel parameters are valid only if an IP address is defined on the appropriate interface. Ensure that each rule has a unique priority. Example The following example shows how all ports are denied in the access-list called mlist. console(config)# management access-list mlist console(config-macal)# deny management access-class Use the management access-class command in Global Configuration mode to restrict management connections. To disable restriction, use the no form of this command. Syntax management access-class {console-only | name} no management access-class • name - A valid access-list name. (Range: 1-32 characters) • console-only - The switch can be managed only from the console. Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines This command has no user guidelines. Management ACL Commands 1525