Dell PowerConnect 8100 CLI Reference Guide - Page 1072

Parameter Description Metric Type The metric type to advertise for redistributed routes of this type. Redist Source The type of routes OSPF is redistributing. Metric The metric to advertise for redistributed routes of this type. Metric Type The metric type to advertise for redistributed routes of this type. Subnets Whether OSPF redistributes subnets of classful addresses, or only classful prefixes. Dist List A distribute list used to filter routes of this type. Only routes that pass the distribute list are redistributed. Number of Active The number of OSPF areas with at least one interface running Areas on this router. Also broken down by area type. ABR Status The number of OSPF areas with at least one interface running on this router. Also broken down by area type. ASBR Status Whether the router is an autonomous system boundary router. The router is an ASBR if it is redistributing any routes or originating a default route. RIP Section RIP Admin Mode Whether RIP is globally enabled. Split Horizon Mode Whether RIP advertises routes on the interface where they were received. Default Metric The metric assigned to redistributed routes. Default Route Advertise Whether this router is originating a default route. Distance The administrative distance for RIP routes. Interface The interfaces where RIP is enabled and the version sent and accepted on each interface. Default Configuration This command has no default configuration. 1072 IP Routing Commands