Dell PowerConnect 8100 CLI Reference Guide - Page 1229

exit-overflow-interval Use the exit-overflow-interval command in Router OSPF Configuration mode to configure the exit overflow interval for OSPF. When a router leaves the overflow state it can originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow State until restarted. Use the no form of the command to return the interval to the default value. Syntax exit-overflow-interval seconds no exit-overflow-interval • seconds - Number of seconds after entering overflow state that a router will wait before attempting to leave the overflow state. (Range: 0-2147483647) Default Configuration 0 seconds is the default configuration. Command Mode Router OSPF Configuration mode. User Guidelines This command has no user guidelines. Example The following example sets the exit overflow interval for OSPF at 10 seconds. console(config-router)#exit-overflow-interval 10 external-lsdb-limit Use the external-lsdb-limit command in Router OSPF Configuration mode to configure the external LSDB limit for OSPF. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches the external LSDB limit, the router enters OSPF Commands 1229