Dell PowerConnect 8100 CLI Reference Guide - Page 1109

Default Configuration 1 is the default value for preference. Command Mode Global Configuration mode User Guidelines This command has no user guidelines. Example The following example configure an IPv6 static route. console(config)#ipv6 route 2020:1::1/64 2030:1::2 ipv6 route distance Use the ipv6 route distance command in Global Configuration mode to set the default distance (preference) for static routes. Lower route preference values are preferred when determining the best route. The ipv6 route and ipv6 route default commands allow optional setting of the distance of an individual static route. The default distance is used when no distance is specified in these commands. Changing the default distance does not update the distance of existing static routes, even if they were assigned the original default distance. The new default distance is applied to static routes created after invoking the ipv6 route distance command. Syntax ipv6 route distance integer no ipv6 route distance integer • integer - Specifies the distance (preference) of an individual static route. (Range 1-255) Default Configuration Default value of integer is 1. IPv6 Routing Commands 1109