Dell PowerConnect 8100 CLI Reference Guide - Page 151

Command delete delete backup-image delete backup-config delete startup-config dir erase filedescr rename show backup-config show bootvar show running-config show startup-config update bootcode write Description Modea Deletes a file from a flash memory. PE Deletes a file from a flash memory device. PE Deletes the backup configuration file. PE Deletes the startup configuration file. PE Prints the contents of the flash file system. PE Erases the startup configuration, the backup PE configuration, or the backup image. Adds a description to a file. PE Renames the file present in flash. PE Displays contents of a backup configuration PE file. Displays the active system image file that the UE switch loads at startup. Displays the contents of the currently running PE configuration file. Displays the startup configuration file contents. PE Updates the bootcode on one or more switches. PE Copies the running configuration image to the PE startup configuration. a. For the meaning of each Mode abbreviation, see Mode Types on page 81. Denial of Service Command dos-control firstfrag dos-control icmp dos-control l4port dos-control sipdip Description Modea Enables Minimum TCP Header Size Denial of GC Service protection. Enables Maximum ICMP Packet Size Denial of GC Service protections. Enables L4 Port Denial of Service protection. GC Enables Source IP Address = Destination IP GC Address (SIP=DIP) Denial of Service protection. Command Groups 151