Dell PowerEdge M620 Hardware Owner's Manual - Page 144

Option Boot Sequence Hard-Disk Drive Sequence USB Flash Drive Emulation Type (Auto default) Boot Sequence Retry (Disabled default) Description If Boot Mode is set to BIOS, this field tells the system where the operating system files needed for startup are located. If Boot Mode is set to UEFI, you can access the UEFI boot manager utility by rebooting the system and pressing F11 when prompted to do so. Determines the order in which the BIOS attempts to boot from hard drives in the system during system startup. Determines the emulation type for a USB flash drive. Hard disk allows the USB flash drive to act as a hard drive. Floppy allows the USB flash drive to act as a removable diskette drive. Auto automatically chooses an emulation type. If this field is enabled and the system has failed to boot, the system reattempts to boot after 30 seconds. Integrated Devices Screen Option Description Integrated SAS Controller or Integrated RAID controller (Enabled default.) Enables the integrated SAS or RAID controller. User Accessible USB Ports (All Ports On default) Enables or disables the system's USB ports. Options are All Ports On or All Ports Off. Internal USB Port Enables or disables the system's internal USB port. (PowerEdge M915, M910, M710, M710HD, M610, and M610x) 144 Using the System Setup Program and UEFI Boot Manager