Dell PowerEdge M620 Hardware Owner's Manual - Page 233
Network Daughter Card/LOM Riser Card (PowerEdge M915 and M710HD Only), Removing the LOM Riser Card - dimensions
View all Dell PowerEdge M620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
To boot from the USB memory key, you must configure the USB memory key with a boot image, and then specify the USB memory key in the boot sequence in the System Setup program. See "Boot Settings Screen" on page 143. For information on creating a bootable file on the USB memory key, see the user documentation that accompanied the USB memory key. CAUTION: To avoid interference with other components in the blade, the maximum allowable dimensions of the USB key are 15.9 mm wide x 57.15 mm long x 7.9 mm high. Figure 3-34. Installing a USB Memory Key 2 1 1 USB memory key connector on system board (PowerEdge M915, M915, andM910) or backplane (PowerEdge M710HD, M610, and M610x) 2 USB memory key Network Daughter Card/LOM Riser Card (PowerEdge M915 and M710HD Only) Removing the LOM Riser Card 1 Remove the blade. See "Removing a Blade" on page 155. 2 Open the blade. See "Opening the Blade" on page 159. 3 Remove the three screws that secure the LOM riser card to the system board. See Figure 3-35. Installing Blade Components 233