Dell PowerEdge M620 Hardware Owner's Manual - Page 55
Mezzanine Cards, PowerEdge M610x Only, Full-Height Blades
View all Dell PowerEdge M620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Mezzanine Cards PowerEdge M610x Only PowerEdge M610x supports two mezzanine cards. Mezzanine cards can be installed in both the slots on the midplane interface card. NOTE: PowerEdge M610x is a full-height blade but supports only two mezzanine cards in the expansion bay. The two mezzanine slots on the M610x system board (MEZZ2_FAB_B and MEZZ1_FAB_C) are reserved for the mezzanine interface card. See "Mezzanine Interface Card (PowerEdge M610x Only)" on page 215. Full-Height Blades Full-height blades support four mezzanine cards: • Slot Mezz1_Fabric_C and slot Mezz3_Fabric_C support Fabric C. They must match the fabric type of the I/O modules installed in I/O module slots C1 and C2. • Slot Mezz2_Fabric_B and slot Mezz4_Fabric_B support Fabric B. They must match the fabric type of the I/O modules installed in I/O module slots B1 and B2. Half-Height Blades Half-height blades support two mezzanine cards: • Mezzanine card slot C supports Fabric C. This card must match the fabric type of I/O modules installed in I/O module slots C1 and C2. • Mezzanine card slot B supports Fabric B. This card must match the fabric type of I/O modules installed in I/O module slots B1 and B2. See "I/O Module Mezzanine Cards" on page 217 for more information on mezzanine cards. Table 1-13 shows various supported combinations of mezzanine cards and I/O modules. About Your System 55