Dell PowerEdge M620 Hardware Owner's Manual - Page 145
Disabled, Enabled with PXE, Enabled, iSCSI Boot, Enabled with iSCSI Boot is enabled. - drivers
View all Dell PowerEdge M620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Option Description Internal SD Card Port Enables or disables the system's internal SD card port. (PowerEdge M915, M910, M905, M805, NOTE: If a hypervisor is installed, it uses this port. M710, M710HD, M610 and M610x) Redundancy (Disabled default) (M915, M910 and M710HD) Enables or disables the mirror mode for Internal Dual SD Module (IDSDM). NOTE: When set to Mirror Mode, the vFlash functionality of the iDRAC 6 card is not available and the card is set as the secondary SD card (SD2) in IDSDM. Embedded NICn and Enables or disables integrated NIC1 and NIC2. Changes NICn take effect after the system reboots. Embedded Gb NICx (Enabled with PXE default) Enables or disables the system's integrated Gb NICs. Options are Enabled, Enabled with PXE, Enabled with iSCSI Boot, and Disabled. PXE support allows the system to boot from the network. Changes take effect after the system reboots. Embedded NIC1 and NIC2 (Enabled default) Enables or disables the system's embedded NIC1 and NIC2 controller. NOTE: For M710HD, you can enable or disable the NIC1/NIC2 and NIC3/NIC4 controllers. MAC Address Displays the MAC address for a particular integrated NIC. This field does not have user-selectable settings. iSCSI MAC Address Displays the iSCSI MAC address for a particular integrated NIC if Enabled with iSCSI Boot is enabled. This field does not have user-selectable settings. Capability Detected Displays the features provided by the hardware key installed in the NIC hardware key socket on the system board. NOTE: Some features may require the installation of an additional driver. Using the System Setup Program and UEFI Boot Manager 145