Dell PowerEdge R760 Installation and Service Manual - Page 165
Table 122. 24 x 2.5-inch SAS/SATA with 4 universal SAS/SATA/NVMe slots+ 4 x 2.5-inch SAS/SATA
![]() |
View all Dell PowerEdge R760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Figure 119. Configuration 43: 24 x 2.5-inch SAS/SATA with 4 universal (SAS/SATA/NVMe) slots + 4 x 2.5-inch SAS/SATA with fPERC (HBA355i) NOTE: Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse sequential order. Table 122. 24 x 2.5-inch SAS/SATA with 4 universal (SAS/SATA/NVMe) slots+ 4 x 2.5-inch SAS/SATA with fPERC (HBA355i) Order From To 1 SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector) 2 SL3_CPU1_PA2 (signal connector on system CTRL_DST_PA1 (fPERC input connector) board) 3 CTRL_SRC_SB1 (fPERC controller connector) BP_DST_SB1 (backplane expander signal connector) 4 CTRL_SRC_SA1 (fPERC controller connector) BP_DST_SA1 (backplane expander signal NOTE: Tightening the connector screws connector) secures the connector end. 5 SL4_CPU1_PB2 (signal connector on system BP_DST_PA2 (backplane signal connector) board) 6 SIG_PWR_2 (system board power connector) BP_PWR_2 (backplane power connector) 7 SL7_CPU1_PB4 (signal connector on system BP_DST_PB2 (backplane signal connector) board) 8 SIG_PWR_0 (system board power connector) BP_PWR_1 (rear backplane power connector) 9 BP_SRC_SA2 (backplane expander signal BP_DST_SA1 (rear backplane signal connector) connector) and BP_DST_SB1 (rear backplane signal connector) Installing and removing system components 165
![](/manual_guide/products/dell-poweredge-r760-installation-service-manual-8c03f25/165.png)