Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.0 - Page 154

Example Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0(R3S). Also supported in SmartFabric mode starting in release 10.5.0. OS10(config)# ip telnet server enable Example (disable) OS10(config)# no ip telnet server enable Supported Releases 10.4.0E(R1) or later ip telnet server vrf Configures the Telnet server for the management or non-default VRF instance. Syntax Parameters ip telnet server vrf {management | vrf vrf-name} • management - Configures the management VRF used to reach the Telnet server. • vrf vrf-name - Enter the keyword vrf followed by the name of the VRF to configure the non-default VRF instance used to reach the Telnet server. Default If the Telnet server is enabled, the Telnet server is reachable on the default VRF. Command Mode CONFIGURATION Usage Information By default, the Telnet server is disabled. To enable the Telnet server, use the telnet enable command. Example OS10(config)# ip telnet server vrf management OS10(config)# ip telnet server vrf vrf-blue Supported Releases 10.4.0E(R1) or later Simple Network Management Protocol Network management stations use simple network management protocol (SNMP) to retrieve and modify software configurations for managed objects on an agent in network devices. A managed object is a datum of management information. The SNMP agent in a managed device maintains the data for managed objects in management information bases (MIBs). Managed objects are identified by their object identifiers (OIDs). A remote SNMP agent performs an SNMP walk on the OIDs stored in MIBs on the local switch to view and retrieve information. OS10 supports standard and private SNMP MIBs, including all get requests. MIBs are hierarchically structured and use object identifiers to access managed objects. For a list of MIBs supported in the OS10 version running on a switch, see the OS10 Release Notes for the release. OS10 supports different security models and levels in SNMP communication between SNMP managers and agents. Each security model refers to an SNMP version used in SNMP messages. SNMP versions provide different levels of security, such as user authentication and message encryption. NOTE: OS10 does not support SNMP SET operations. SNMP security models and levels OS10 supports SNMP security models v1, v2c, and v3. The supported security levels are no authentication, authentication, and privacy. You specify the SNMP security model and level when you configure SNMP groups and users. Each security model corresponds to an SNMP version that provides different security levels: • SNMPv1 provides no user authentication or privacy protection (encryption). SNMP messages are sent in plain text. • SNMPv2c provides no user authentication or encryption. SNMP messages are sent in plain text. • SNMPv3 provides user-configured security levels for user authentication and encryption of SNMP messages: ○ No user password or message encryption 154 System management