Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.0 - Page 187

Table 43. Time zones and UTC offset (continued) Continent/Country City Hawaii Indiana-Starke Michigan Mountain Pacific Pacific-New Samoa UTC WET W-SU Zulu UTC offset −10:00 −06:00 −05:00 −07:00 −08:00 −08:00 −11:00 +00:00 +00:00 +03:00 +00:00 System Clock commands clock set Sets the system time. Syntax Parameters clock set time year-month-day time year-month-day Enter time in the format hour:minute:second, where hour is 1 to 24; minute is 1 to 60; second is 1 to 60. For example, enter 5:15 PM as 17:15:00. Enter year-month-day in the format YYYY-MM-DD, where YYYY is a four-digit year, such as 2016; MM is a month from 1 to 12; DD is a day from 1 to 31. Default Not configured Command Mode EXEC Usage Information Use this command to reset the system time if the system clock is out of synch with the NTP time. The hardwarebased real-clock time (RTC) resets to the new time. The new system clock setting applies immediately. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1. Example OS10# clock set 18:30:10 2017-01-25 Supported Releases 10.2.1E or later clock timezone Configures the standard or user-defined time zone that OS10 applies on top of the system clock. Syntax Parameters clock timezone {standard-timezone standard-timezone-name | {timezone-string hours minutes}} • standard-timezone-name - Enter the standard time zone name that is supported in Linux. To view a list of supported standard time zone names, see the Time zones and UTC offset reference section. • timezone-string - Enter the name of the time zone. • hours - Enter the hour offset from UTC, ranging from -23 to 23. System management 187