Dell PowerVault TL4000 SCSI Reference Guide - Page 108
Notes
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
B6h SEND VOLUME TAG A4h SET TIMESTAMP 00h TEST UNIT READY 3Bh WRITE BUFFER 30 seconds 30 seconds 10 seconds 3 minutes 5 Notes: 1. The Initialize Element Status time-out assumes a fully populated unit. 2. The Initialize Element Status With Range time-out assumes a fully populated unit. 3. The Move Medium command assumes a move from one storage element to the data transfer element or vice versa. If the cartridge has not been unloaded by a host command to the tape drive, prior to receiving the Move Medium command, the media changer will issue an Unload command to the tape drive. Therefore, the time-out value needs to be adjusted fro the maximum time a data transfer element takes to rewind and unload the cartridge. 4. The Read Buffer time-out is based on a 16K-data-chunk request. Adjust the time-out value if larger data chunks are requested. 5. The Write Buffer time-out is based on a 16K-data-chunk request. Adjust the time-out value if larger data chunks are sent. 6-2 TL2000 and TL4000 SCSI Reference