Dell PowerVault TL4000 SCSI Reference Guide - Page 75
Additional, Sense, Qualifier, SValid, Invert, Medium, Source, Storage, Element, Address, Primary,
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Enable bit of one indicates that the import/export element supports movement of media out of the scope of the media changer device. An InEnab bit of zero indicates that this element does not support export actions. CMC: Connected Media Changer bit of one indicates that exports are to a connected media changer. A CMC bit of zero indicates that exports are to the operator and imports are from the operator. OIR: Operator Intervention Required bit of one indicates operator intervention is required to make the import/export element accessible. The OIR bit shall be set to zero if no operator intervention is required or if the Access bit is set to one. Additional Sense Code: This field may provide specific information about an abnormal import/export element state. Additional Sense Code Qualifier: This field may provide more detail about an abnormal import/export element state. SValid: Source Valid. When set to 1, indicates that the Source Storage Element Address field and the Invert bit information fields are valid. When set to 0, indicates that the values in these fields are not valid. Invert: The library uses singe sided media and does not support inverting of the media. The value reported for this field is 0. ED: An ED bit of one indicates the element is disabled (e.g. a magazine is not installed or has been logical disabled). An ED bit value of zero indicates the element is enabled. Medium Type: The Medium Type field provides the type of medium currently present in the import/export Element. Next table describes the values for the Medium Types. 0h 1h 2h 3h 4h 5h - 7h Unspecified Data Medium Cleaning Medium Diagnostics Medium WORM Medium Reserved Source Storage Element Address: This field provides the address of the last storage element from which the tape cartridge was moved (valid only if the SValid bit is 1). Primary Volume Tag Information: When VolTag in the CDB is set the Primary Volume Tag Information field provides identifying the unit of media in this element. When VolTag in the CDB is not set this field will be omitted. Next table contains a list of the ASC and ASCQ values that will appear in the Additional Sense Code and Additional Sense Code Qualifier fields of an element descriptor if the element is in an abnormal state. The Except field of an element descriptor indicates if an element is in an abnormal state. ASC 30h 30h 3Bh ASCQ 03h 83h 12h Description Cleaning cartridge Cleaning cartridge without bar code label Magazine removed Action The element contains a cleaning cartridge. The element contains a cleaning cartridge without a readable bar code label. Insert magazine. Chapter 3. Supported SCSI Commands 3-61