Dell PowerVault TL4000 SCSI Reference Guide - Page 36
Select, Parameter, Header, Parity
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1Fh 00h 20h 00h Device Capabilities No page Event Filter page Yes (Vendor Specific) Provides a means to set the media changers capabilities. (not changeable). This page provides a means to mask certain error event types from the event logging of the SCSI controller. Mode Select Parameter List The Mode Select parameter list shown below, contains a 4-byte header, followed by an optional 8 byte block descriptor after which the Mode Select pages are specified. Bit 7 6 5 4 3 2 1 0 Byte 0 - 3 Parameter List Header 4 - n Mode Select page(s) Parameter List Header If you send any page(s) using the Mode Select command to the media changer you must first send the Parameter List Header, followed by the requested Mode Select page(s). The Parameter List Header has the following format: Bit 7 6 5 4 3 2 1 0 Byte 0 Reserved 1 Reserved 2 Reserved 3 Block Descriptor Length (0) If no Block Descriptor is to be sent to the media changer specify zero as Block Descriptor Length in the Parameter Header. After the Parameter List Header the application client can send zero, one or more Mode Select Pages to the media changer to configure any required parameter. Parity page (00h) By means of the Parity page the host can enable Parity retries and select the maximum number of retries. Note this page will be stored in non volatile memory when the Host enables the SP bit in the CDB. Bit 7 6 5 4 3 2 1 0 Byte 0 Reserved SPF (0) Page Code (00h) 1 Additional Page Length (02h) 2 Reserved Parity Reserved 3 Maximum Parity retries Field descriptions: 3-22 TL2000 and TL4000 SCSI Reference