Dell PowerVault TL4000 SCSI Reference Guide - Page 50
Reserved
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Bit Byte 14 15 16 19 7 6 I/E→WA (0) DT→WA (0) 5 4 3 2 1 0 Reserved Reserved I/E↔DT (0) DT↔DT (0) Reserved I/E↔I/E (0) DT↔I/E (0) I/E↔ST (0) DT↔ST (0) I/E↔ST (0) DT↔ST (0) Field descriptions: PS: Parameters Savable. This field is set to zero. the media changer cannot write this page to non-volatile memory. DT: Data Transfer. The value for this field is 1. Tape drives can store cartridges. I/E: Import/Export. The value for this field is 1. The Import/Export element can store cartridges. ST: Storage. The value reported for this field is 1. The storage elements can store cartridges. MT: Medium Transport. The value for this field is 0. The medium transport element cannot store cartridges. S2C: SMC-2 Capabilities field is set to 1. This bit indicates that this page supports the new VRTP, ACE, XX-RA, and XX-WA fields. VTRP: Volume Tag Reader Present. When set to 1 this bit indicates that the library does have a bar code reader. When set to zero the library does not have a bar code reader. ACE: Auto Clean Enabled. When set to one, the library shall automatically clean the data transfer element. When set to zero the library does not automatically clean the data transfer element. XX→YY: (Where XX is a valid source and YY is a valid destination address) If one of these bits is set to 1, it indicates that the medium changer device supports all Move Medium commands for which the source is element type XX and the destination is element type YY on the condition that the element addresses are valid. XX↔YY: A one in these fields indicates that the medium can be exchanged by means of the Exchange Media command between elements of types XX and YY on the condition that the element addresses are valid. XX→RA: These fields indicate the resources required to support the READ ATTRIBUTE commands for each element type XX. The media changer does not support the READ ATTRIBUTE command therefore these fields are set to 0. XX→WA: These fields indicate the resources required to support the WRITE ATTRIBUTE commands for each element type XX. The media changer does not support the WRITE ATTRIBUTE command therefore these fields are set to 0. Vendor Specific Event Filter page (20h) By means of this page the host can read out the current selected event logging mode and determine what event types will be stored in the event log. 3-36 TL2000 and TL4000 SCSI Reference