Dell PowerVault TL4000 SCSI Reference Guide - Page 28
Parameter, Length, Event, Source, module, event, event, Length
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TMC: No threshold supported, set to 0. LP: The List Parameter field is set to zero for parameters that are counters and set to one for parameters that are not counters. Parameter Length: This field specifies the total length of the event structure, including the additional event data, but without the 4 byte header. Event type: This field specifies the event type. Possible event types are shown in table below. Source module ID of event: This field specifies the module ID that generated the event. Possible source module ID s are listed below in a table. Time of event in sec: This field records the time the event took place. Data type of event data: This field specifies the format of the additional event data. It is set to 00h when additional event data contains binary data or set to 01h when additional event data contains ASCII data. Length of event data: This field specifies the amount of event data. The length specified in this field ranges between 0 and 114 bytes. Event data: The Event data field contains detailed information about the event. The amount of event data ranges between 0 up to maximum 114 bytes. Next table describes the possible Event types. Event type Cmd Response Event Trace Data Low Level Trace Customer Events Recovered Error Hardware Error Identifier 01h 02h 04h 08h 10h 20h 40h 80h Next table describes the possible Source module ID s which may generate events. Source module ID of event Main Drive CDB Interpreter Accessor Trace OCP Input OCP Output SCSI Identifier 0001h 0002h 0004h 0008h 0010h 0020h 0040h 0080h 3-14 TL2000 and TL4000 SCSI Reference