Dell PowerVault TL4000 SCSI Reference Guide - Page 51
Field, descriptions, Event, Filter
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Bit 7 Byte 0 PS (1) 1 2 3 4 5 6 7 8 - 9 6 SPF (0) 5 4 3 2 Page Code (20h) Additional Page Length (08h) Reserved Reserved Reserved Reserved Reserved Event Type Filter Event Module Filter 1 0 Log Mode Seq Mode Field descriptions: PS: Parameters Savable. This field is set to one. The media changer can write this page to non-volatile memory. Seq Mode: This bit indicates the operational mode of the library. When set to 1, the library is in Sequential Mode. When set to 0, the library is in Random Mode. Note this mode can only be changed by means of the OCP or Web User interfaces. Log Mode: The Log Mode determines the selected behavior of the event log system. This mode can be set to the following different modes: Log Mode - Off - Continuous - Wait on first error Description Mode Logging is disabled 00h Logging has no stop condition. Only n 01h events can be traced back. Older events are lost. The first occurred error will lead to a 02h temporary stop of the library. Event Type Filter: The Event Type Filter field determines which event types will be stored in the event log. this field is an 8 bit mask. Every bit in this mask represents an event type. When a mask bit is set, all events with the subsequent event type will be stored in the event log. When a mask bit is cleared, the event data of the subsequent event type will be discarded. Event Type Cmd Response Event Trace Data Low Level Trace Customer Events Recovered Error Hard Error Mask Bit 01h 02h 04h 08h 10h 20h 40h 80h Chapter 3. Supported SCSI Commands 3-37