Dell PowerVault TL4000 SCSI Reference Guide - Page 55
Medium
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
MOVE MEDIUM (A5h) The Move Medium command is used to move tape cartridges from one element address to another specific element address. The library can transfer cartridges between Storage Elements, Import/Export Elements, and Data Transfer Elements. Bit 7 Byte 0 1 2 (MSB) 3 4 (MSB) 5 6 (MSB) 7 8 9 10 11 6 LUN 5 4 3 2 1 Operation Code (A5h) Reserved Medium Transport Address Source Address Destination Address Reserved Reserved Reserved Control 0 (LSB) (LSB) (LSB) Invert Field descriptions: Medium Transport Address: This field specifies the medium transport element used to execute the Move Medium command. This value can be set to either 0 or the currently valid Medium Transport Element address. Source Address: Element address from which the tape cartridge is being moved. This can be a Storage Element address, Import/Export Element address or a Data Transfer Element address. Destination Address: Element address to which the tape cartridge is being moved. This can be a Storage Element address, Import/Export Element address or a Data Transfer Element address. Invert: An Invert bit of one specifies that the medium should be inverted or rotated prior to depositing the medium into the destination element. The library does not support medium rotation. Therefore this field must be set to zero. Chapter 3. Supported SCSI Commands 3-41