Dell PowerVault TL4000 SCSI Reference Guide - Page 30

Dell PowerVault TL4000 Manual

Page 30 highlights

04d Library C v Make sure the media changer and drives are not being used by any Hardware D host, then reset the library from the front panel. v If the problem persists, contact Technical Support. 13d Library Pick W There is a potential problem with the cartridge loader picking a cartridge Retry from a drive or slot. v No action needs to be taken at this time. v If the problem persists, contact Technical Support This flag is cleared when the next move command is received. 14d Library Place W There is a potential problem with the cartridge loader placing a cartridge Retry into a slot. v No action needs to be taken at this time. v If the problem persists, contact Technical Support. This flag is cleared when the next move command is received. 15d Drive Load W There is a potential problem with the cartridge loader or drive when Retry placing a cartridge into a drive. v No action needs to be taken at this time. v If the problem persists, contact Technical Support. This flag is cleared when the next move command is received. 16d Library Door W The operation has failed because the library door is open. v Clear any obstructions from the library door. v Close the library door. v If the problem persists, contact Technical Support. This flag is cleared when the door is closed. 17d Library I/O C There is a mechanical problem with the library media I/O Station. Station 18d Library C The library cannot operate without the magazine. Magazine v Insert the magazine into the library. v Restart the operation. 19d Library W Library security has been compromised. The door was opened then Security closed during operation. 21d Library Offline I The library has been manually turned offline and is unavailable for use. 22d Library drive I A drive inside the library has been taken offline. This is for information Offline purposes only. No action is required. 24d Library C The library has detected an inconsistency in its inventory. Inventory v Redo the library inventory to correct inconsistency. v Restart the operation. Check the applications users manual or the hardware users manual for specific instructions on redoing the library inventory. 25d Library Illegal W A library operation has been attempted that is invalid at this time. Operation 27d Cooling FAN W One or more fans inside the library have failed. This flag is cleared when Failure all fans are working again. 32d Unreadable I The library was unable to read the barcode on a cartridge. Bar Code Labels 3-16 TL2000 and TL4000 SCSI Reference

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

04d
Library
Hardware
D
C
v
Make
sure
the
media
changer
and
drives
are
not
being
used
by
any
host,
then
reset
the
library
from
the
front
panel.
v
If
the
problem
persists,
contact
Technical
Support.
13d
Library
Pick
Retry
W
There
is
a
potential
problem
with
the
cartridge
loader
picking
a
cartridge
from
a
drive
or
slot.
v
No
action
needs
to
be
taken
at
this
time.
v
If
the
problem
persists,
contact
Technical
Support
This
flag
is
cleared
when
the
next
move
command
is
received.
14d
Library
Place
Retry
W
There
is
a
potential
problem
with
the
cartridge
loader
placing
a
cartridge
into
a
slot.
v
No
action
needs
to
be
taken
at
this
time.
v
If
the
problem
persists,
contact
Technical
Support.
This
flag
is
cleared
when
the
next
move
command
is
received.
15d
Drive
Load
Retry
W
There
is
a
potential
problem
with
the
cartridge
loader
or
drive
when
placing
a
cartridge
into
a
drive.
v
No
action
needs
to
be
taken
at
this
time.
v
If
the
problem
persists,
contact
Technical
Support.
This
flag
is
cleared
when
the
next
move
command
is
received.
16d
Library
Door
W
The
operation
has
failed
because
the
library
door
is
open.
v
Clear
any
obstructions
from
the
library
door.
v
Close
the
library
door.
v
If
the
problem
persists,
contact
Technical
Support.
This
flag
is
cleared
when
the
door
is
closed.
17d
Library
I/O
Station
C
There
is
a
mechanical
problem
with
the
library
media
I/O
Station.
18d
Library
Magazine
C
The
library
cannot
operate
without
the
magazine.
v
Insert
the
magazine
into
the
library.
v
Restart
the
operation.
19d
Library
Security
W
Library
security
has
been
compromised.
The
door
was
opened
then
closed
during
operation.
21d
Library
Offline
I
The
library
has
been
manually
turned
offline
and
is
unavailable
for
use.
22d
Library
drive
Offline
I
A
drive
inside
the
library
has
been
taken
offline.
This
is
for
information
purposes
only.
No
action
is
required.
24d
Library
Inventory
C
The
library
has
detected
an
inconsistency
in
its
inventory.
v
Redo
the
library
inventory
to
correct
inconsistency.
v
Restart
the
operation.
Check
the
applications
users
manual
or
the
hardware
users
manual
for
specific
instructions
on
redoing
the
library
inventory.
25d
Library
Illegal
Operation
W
A
library
operation
has
been
attempted
that
is
invalid
at
this
time.
27d
Cooling
FAN
Failure
W
One
or
more
fans
inside
the
library
have
failed.
This
flag
is
cleared
when
all
fans
are
working
again.
32d
Unreadable
Bar
Code
Labels
I
The
library
was
unable
to
read
the
barcode
on
a
cartridge.
3-16
TL2000
and
TL4000
SCSI
Reference