Dell PowerVault TL4000 SCSI Reference Guide - Page 63
Prevent, Allow, Media, Removal
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
PREVENT / ALLOW MEDIA REMOVAL (1Eh) The PREVENT / ALLOW MEDIA REMOVAL commands enable or disable removing cartridges from the media changer. A prevent condition inhibits the media changer to remove magazines and open the Import/Export element. A prevent condition of the media changer shall not affect an UNLOAD command issued to the tape drive. Also a prevent condition shall not inhibit a front panel LOAD of a cartridge when the tape drive is empty. A prevent condition is cleared when all initiators issue the Prevent Allow Medium Removal command with the Prevent field set to 0 (allow cartridge removal). The prevent condition is also cleared after a power on and after a SCSI Bus reset. Bit 7 Byte 0 1 2 3 4 5 6 LUN 5 4 3 2 1 Operation Code (1Eh) Reserved Reserved Reserved Control Reserved 0 Prevent Field descriptions: Prevent: When this bit is set, opening of the Import/Export element and unlocking of the magazine functions are disabled. When the Prevent bit is cleared opening of the Import/Export element and the unlocking of the magazine functions are enabled. Chapter 3. Supported SCSI Commands 3-49