Dell S510n Dell Interactive Projector S510/ Users Guide - Page 45
Wireless Settings, button to select IP Address, Subnet Mask
![]() |
View all Dell S510n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
NOTE: 1 Use and button to select IP Address, Subnet Mask, Gateway, DNS, and Store. 2 Press the button to enter IP Address, Subnet Mask, Gateway or DNS to set the value. (The selected option is highlighted in blue) a Use and button to select the option. b Use and button to set the value. c After the setup is complete, press the button to exit. 3 After the IP Address, Subnet Mask, Gateway, and DNS is set up, select Store and press button to store the settings. 4 If you select Store without pressing the Enter button, the system will keep the original settings. RESET-Press to reset network configuration. WIRELESS SETTINGS-Select and press to activate wireless settings. The wireless settings menu provides the following options: DHCP SERVER-Allows you to enable DHCP server of the wireless. START IP ADDRESS-Automatically or manually assigns the Start IP address of the DHCP server to the projector connected to the wireless. END IP ADDRESS-Automatically or manually assigns the End IP address of the DHCP server to the projector connected to the wireless. SUBNET MASK-Configure the Subnet Mask of the wireless connection. GATEWAY-Check the Gateway address with your network/system administrator if you configure it manually. DNS-Check the DNS Server IP address with your network/system administrator if you configure it manually. STORE-Press to save the changes made in wireless configuration settings. Using Your Projector 45
![](/manual_guide/products/dell-s510n-dell-interactive-projector-s510-users-guide-7f4bbb3/45.png)