Dell S510n Dell Interactive Projector S510/ Users Guide - Page 92
Display over USB with Mac, DoUSB, Storage Mode
View all Dell S510n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Display over USB with Mac 1 Connect the power cable and press the power button. 2 Connect the USB (type A to B) cable to the projector and the computer. 3 When you connect the projector and computer via USB cable, a USB Connected message will pop up and allow you to select DoUSB or Storage Mode. Select "DoUSB" option to switch to the USB Display source. NOTE: DoUSB function needs install driver in Mac operating system. If your Mac computer does not have the driver installed, a pop-up message will appear on-screen prompting you to install the required driver. See "Install the DoUSB Driver" on page 93. 92 Using Your Projector
92
Using Your Projector
Display over USB with Mac
1
Connect the power cable and press the power button.
2
Connect the USB (type A to B) cable to the projector and the
computer.
3
When you connect the projector and computer via USB cable, a USB
Connected message will pop up and allow you to select
DoUSB
or
Storage Mode
. Select "
DoUSB
" option to switch to the USB Display
source.
NOTE:
DoUSB function needs install driver in Mac operating system.
If your Mac computer does not have the driver installed, a pop-up
message will appear on-screen prompting you to install the required
driver. See "Install the DoUSB Driver" on page 93.