Dell S510n Dell Interactive Projector S510/ Users Guide - Page 57
Pen Calibration, on the sub-menu.
![]() |
View all Dell S510n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Pen Calibration 10 Click the Pen driver icon, select Calibrate pen and then select Auto on the sub-menu. If the "auto calibrate failed" message prompts, please take the steps below for troubleshooting, then do auto calibrate again. a Turn lights off or reduce stray light to whiteboard b Do not walk in front of or move the projector c Adjust focus to sharpen the projected image If the "auto calibrate still failed" message appears on screen, please change to manual calibrate. Manual Calibrate: Click the Pen driver icon, select Calibrate pen and then select auto calibrate still failed on the sub-menu. 1 2 3 4 Using Your Projector 57
![](/manual_guide/products/dell-s510n-dell-interactive-projector-s510-users-guide-7f4bbb3/57.png)
Using Your Projector
57
Pen Calibration
10
Click the Pen driver
icon, select
Calibrate pen
and then
select
Auto
on the sub-menu.
If the "
auto calibrate failed
" message prompts, please take the
steps below for troubleshooting, then do auto calibrate again.
a
Turn lights off or reduce stray light to whiteboard
b
Do not walk in front of or move the projector
c
Adjust focus to sharpen the projected image
If the "
auto calibrate still failed
" message appears on screen,
please change to manual calibrate.
Manual Calibrate:
Click the Pen driver
icon, select
Calibrate pen
and then
select
auto calibrate still failed
on the sub-menu.
1
3
4
2