Dell S510n Dell Interactive Projector S510/ Users Guide - Page 91
Using USB Display (DoUSB), Display over USB with Windows
![]() |
View all Dell S510n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Using USB Display (DoUSB) Display over USB with Windows 1 Connect the power cable and press the power button. 2 Connect the USB (type A to B) cable to the projector and the computer. 3 When you connect the projector and computer via USB cable, a USB Connected message will pop up and allow you to select DoUSB or Storage Mode. Select "DoUSB" option to switch to the USB Display source. NOTE: If the DoUSB can't display, please see "Troubleshooting Your Projector" on page 130. Using Your Projector 91
![](/manual_guide/products/dell-s510n-dell-interactive-projector-s510-users-guide-7f4bbb3/91.png)
Using Your Projector
91
Using USB Display (DoUSB)
Display over USB with Windows
1
Connect the power cable and press the power button.
2
Connect the USB (type A to B) cable to the projector and the
computer.
3
When you connect the projector and computer via USB cable, a USB
Connected message will pop up and allow you to select
DoUSB
or
Storage Mode
. Select "
DoUSB
" option to switch to the USB Display
source.
NOTE:
If the DoUSB can't display, please see "Troubleshooting Your
Projector" on page 130.