Dell Z9100 EMC Networking with Isilon Front-End Deployment and Best Practices - Page 28
Server 2-1, channel-group 102 mode active
View all Dell Z9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
S4048-ON Leaf 1 interface ethernet1/1/1 description "Isilon Node 1-10gige-1" no shutdown channel-group 1 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off interface ethernet1/1/3 description "Isilon Node 2-10gige-1" no shutdown channel-group 3 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off interface ethernet1/1/5 description "Isilon Node 3-10gige-1" no shutdown channel-group 5 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off interface ethernet1/1/17 description "Server 1-1" no shutdown channel-group 101 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off interface ethernet1/1/19 description "Server 2-1" no shutdown channel-group 102 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off S4048-ON Leaf 2 interface ethernet1/1/1 description "Isilon Node 1-10gige-2" no shutdown channel-group 1 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off interface ethernet1/1/3 description "Isilon Node 2-10gige-2" no shutdown channel-group 3 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off interface ethernet1/1/5 description "Isilon Node 3-10gige-2" no shutdown channel-group 5 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off interface ethernet1/1/17 description "Server 1-2" no shutdown channel-group 101 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off interface ethernet1/1/19 description "Server 2-2" no shutdown channel-group 102 mode active no switchport mtu 9216 flowcontrol receive on flowcontrol transmit off The two upstream layer 3 interfaces connected to the spine switches are configured. Assign IP addresses per Table 3. Configure a loopback interface to be used as the router ID. This is used with BGP. 28 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0