Dell Z9100 EMC Networking with Isilon Front-End Deployment and Best Practices - Page 61
Show VLT mismatch, 8.1.7 Show uplink-state-group, VLT Unit ID
View all Dell Z9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
1 port-channel1 up 1 1 * 2 port-channel1 up 1 1 vlt-port-channel ID : 3 VLT Unit ID Port-Channel Status Configured ports Active ports 1 port-channel3 up 1 1 * 2 port-channel3 up 1 1 vlt-port-channel ID : 5 VLT Unit ID Port-Channel Status Configured ports Active ports 1 port-channel5 up 1 1 * 2 port-channel5 up 1 1 vlt-port-channel ID : 101 VLT Unit ID Port-Channel Status Configured ports Active ports 1 port-channel101 up 1 1 * 2 port-channel101 up 1 1 vlt-port-channel ID : 102 VLT Unit ID Port-Channel Status Configured ports Active ports 1 port-channel102 up 1 1 * 2 port-channel102 up 1 1 8.1.6 Show VLT mismatch This command highlights configuration issues between VLT peers. Mismatch examples include incompatible VLT configuration settings, VLAN differences, the different switch operating system versions and STP inconsistencies. There should be no output to this command on any switch correctly configured for VLT. If there is, resolve the mismatch. S4048-Leaf1# show vlt 127 mismatch Peer-routing mismatch: No mismatch VLAN mismatch: No mismatch VLT VLAN mismatch: No mismatch 8.1.7 Show uplink-state-group This command is used to validate the UFD status on leaf switches in this topology. Status: Enabled, Up indicates UFD is enabled and no interfaces are currently disabled by UFD. S4048-Leaf1# show uplink-state-group 1 61 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0