Dell Z9100 EMC Networking with Isilon Front-End Deployment and Best Practices - Page 47

Note: Refer to Isilon Network Design Considerations for more information on specific protocols as they relate to OneFS. S4048-ON Leaf 1 interface range ethernet 1/1/53-1/1/54 decription VLTi no switchport no shutdown vlt-domain 127 backup destination 100.67.170.14 discovery-interface ethernet 1/1/53-1/1/54 S4048-ON Leaf 2 interface range ethernet 1/1/53-1/1/54 description VLTi no switchport no shutdown vlt-domain 127 backup destination 100.67.170.15 discovery-interface ethernet 1/1/53-1/1/54 Next, we will create the VLANs. IP addresses and VRRP is configured at the spine layer. On each leaf switch, the respective VLAN will be defined without an IP address or VRRP. S4048-ON Leaf 1 interface vlan100 no shutdown S4048-ON Leaf 2 interface vlan100 no shutdown Configure the downstream port channels. There will be one port channel for each server as well as a single port channel for each of the Isilon nodes. Each port channel is assigned an MTU of 9216 to support jumbo frames, as well configured to allow access to VLAN 100. The vlt-port-channel # command enables port channels on VLT peers to function as a single port channel. 47 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0