Dell Z9100 EMC Networking with Isilon Front-End Deployment and Best Practices - Page 71
Network configurations>subnet1>pool1, Add static route, Parameter, Value, LACP configuration
View all Dell Z9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
LACP configuration The next section will cover the configuration of static routes within OneFS. This is necessary to enable traffic to cross between the two subnets. 1. Navigate Network configurations>subnet1>pool1, Add static route to subnet 2. Parameter Subnet Netmask Gateway Value 172.16.2.0 255.255.255.0 172.16.1.254 2. Navigate Network configurations>subnet2>pool2, Add static route to subnet 1. Parameter Subnet Netmask Gateway Value 172.16.1.0 255.255.255.0 172.16.2.254 71 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0
71
Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0
LACP configuration
The next section will cover the configuration of static routes within OneFS.
This is necessary to enable traffic
to cross between the two subnets.
1. Navigate
Network configurations>subnet1>pool1,
Add static route
to subnet 2.
Parameter
Value
Subnet
172.16.2.0
Netmask
255.255.255.0
Gateway
172.16.1.254
2. Navigate
Network configurations>subnet2>pool2,
Add static route
to subnet 1.
Parameter
Value
Subnet
172.16.1.0
Netmask
255.255.255.0
Gateway
172.16.2.254