Dell Z9100 EMC Networking with Isilon Front-End Deployment and Best Practices - Page 53
The downstream interfaces will be con d in the next
View all Dell Z9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
S4048-ON Leaf 3 interface port-channel128 description VLTi channel-member fortyGigE 1/53 channel-member fortyGigE 1/54 no shutdown no switchport interface fortyGigE 1/53 description VLTi no shutdown no switchport interface fortyGigE 1/54 description VLTi no shutdown no switchport vlt domain 127 peer-link port-channel 128 back-up destination 100.67.171.14 unit-id 0 S4048-ON Leaf 4 interface port-channel128 description VLTi channel-member fortyGigE 1/53 channel-member fortyGigE 1/54 no shutdown no switchport interface fortyGigE 1/53 description VLTi no shutdown no switchport interface fortyGigE 1/54 description VLTi no shutdown no switchport vlt domain 127 peer-link port-channel 128 back-up destination 100.67.171.15 unit-id 1 Note: When port channel 128 is added to the vlt domain the MTU setting is automatically changed to 9216. The downstream interfaces will be configured in the next section. Dell recommends asymmetrical flow control (rx on tx off) on S4048-ON leaf switches which have sufficient egress buffers to reduce packet drops and resulting retransmissions. This feature should be applied on all host interfaces that support flow control. In OS10EE this is enabled by default, in OS9 it must be configured. Flow Control is configured with the flowcontrol rx on tx off command. 53 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0