Dell Z9100 EMC Networking with Isilon Front-End Deployment and Best Practices - Page 54
Isilon Node 4-10gige-2
View all Dell Z9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
S4048-ON Leaf 3 interface tengigabitethernet 1/1 description "Isilon Node 4-10gige-1" no shutdown port-channel-protocol LACP port-channel 1 mode active mtu 9216 flowcontrol rx on tx off interface tengigabitethernet 1/3 description "Isilon Node 5-10gige-1" no shutdown port-channel-protocol LACP port-channel 3 mode active mtu 9216 flowcontrol rx on tx off interface tengigabitethernet 1/5 description "Isilon Node 6-10gige-1" no shutdown port-channel-protocol LACP port-channel 5 mode active mtu 9216 flowcontrol rx on tx off interface tengigabitethernet 1/17 description "Server 3-1" no shutdown port-channel-protocol LACP port-channel 101 mode active mtu 9216 flowcontrol rx on tx off interface tengigabitethernet 1/19 description "Server 4-1" no shutdown port-channel-protocol LACP port-channel 102 mode active mtu 9216 flowcontrol rx on tx off S4048-ON Leaf 4 interface tengigabitethernet 1/1 description "Isilon Node 4-10gige-2" no shutdown port-channel-protocol LACP port-channel 1 mode active mtu 9216 flowcontrol rx on tx off interface tengigabitethernet 1/3 description "Isilon Node 5-10gige-2" no shutdown port-channel-protocol LACP port-channel 3 mode active mtu 9216 flowcontrol rx on tx off interface tengigabitethernet 1/5 description "Isilon Node 6-10gige-2" no shutdown port-channel-protocol LACP port-channel 5 mode active mtu 9216 flowcontrol rx on tx off interface tengigabitethernet 1/17 description "Server 3-2" no shutdown port-channel-protocol LACP port-channel 101 mode active mtu 9216 flowcontrol rx on tx off interface tengigabitethernet 1/19 description "Server 4-2" no shutdown port-channel-protocol LACP port-channel 102 mode active mtu 9216 flowcontrol rx on tx off Configure the necessary downstream port channels. There will be one port channel for each server as well as a single port channel for each of the Isilon nodes. Each port channel is assigned an MTU of 9216 to support jumbo frames. The vlt-peer-lag-port-channel # command ensures that each switch in the VLT is aware of all port channels and can act accordingly in the event of a switch failure. 54 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0